Project Rwanda Coffee Bike – CYC Photon Conversion (Part 2)
With the hard part out of the way Project Rwanda Coffee Bike – CYC Photon Conversion (Part 1), the remaining pieces include pannier rails, a new rear deck, and figuring out a better seat pad for the bike.
I started out with ordering 2 x 16mm x 1000mm carbon fiber tubes, some rubber endcaps, and some stainless-steel pipe clamps. Stainless Steel M10 bolts, aluminum spacers, and some seat cushions were also ordered.
![](https://www.grantkohler.com/wp-content/uploads/2024/07/rubbercaps.jpg)
![](https://www.grantkohler.com/wp-content/uploads/2024/07/m6hardware.jpg)
![](https://www.grantkohler.com/wp-content/uploads/2024/07/pipeclamp.jpg)
![](https://www.grantkohler.com/wp-content/uploads/2024/07/carbontube.jpg)
![](https://www.grantkohler.com/wp-content/uploads/2024/07/m10.png)
![](https://www.grantkohler.com/wp-content/uploads/2024/07/seat.png)
![](https://www.grantkohler.com/wp-content/uploads/2024/07/s-l500.webp)
![](https://www.grantkohler.com/wp-content/uploads/2024/07/IMG20240607172743-1024x466.jpg)
I’m waiting to try out a different set of wood rails for the side of the bike. Still need to source plywood I can find in small strips shorter than a meter. The aluminum spacers will offset the wood deck 1cm, as well as the side rails, giving bags and cargo more space away from the tires.
I will update this article once I have the spacers and side rails installed.